中国近海藻毒素及有毒微藻产毒原因种调查研究进展   总被引：2，自引：0，他引：2  

梁玉波  李冬梅  姚敬元  金薇  宫长宝  刘仁沿 《海洋与湖沼》2019,50(3):511-524

麻痹性贝类毒素在我国近海污染问题已十分突出,基本呈现逐年加剧的趋势。20世纪90年代,南海麻痹性贝类毒素污染较重; 21世纪初,北黄海麻痹性贝类毒素污染较重;近几年,渤海和福建近海麻痹性贝类毒素污染较重;可产生麻痹性贝类毒素的微藻有亚历山大藻和裸甲藻等。采用小鼠生物法检测我国近海腹泻性贝类毒素超标率32%左右,采用液相色谱/质谱法检测,仅有3起超标的研究报道;现行小鼠生物法检测腹泻性贝类毒素假阳性问题十分突出,应尽快废除;腹泻性贝类毒素均是脂溶性的,脂溶性海洋生物毒素在我国近海常年可检出,偶有虾夷扇贝毒素和鳍藻毒素超标现象。可产生脂溶性毒素微藻有鳍藻和原甲藻及网状原角藻等。失忆性贝类毒素在我国近海常有检出,但无超标现象;产毒微藻有拟菱形藻等。西加鱼毒素在我国南海污染较重,但毒素标准物质的匮乏,限制了西加鱼毒素的调查研究;至今尚未确定产生西加鱼毒素的微藻。酶联免疫吸附法和液相色谱串联质谱法相结合已成为藻毒素快速准确检测成熟的技术,逐渐代替小鼠生物法和液相色谱法。  相似文献   

大气负荷对新疆地区地壳形变和地面重力变化的影响     

王海涛  王斌  王伟  章传银 《大地测量与地球动力学》2019,39(2):189-194

基于ECMWF全球大气模型和中国地面气候资料日值数据集中新疆及周边的气象站气压数据，根据弹性地壳形变理论，采用移去-恢复法，利用负荷格林函数法和球谐函数法，计算新疆及周边区域2011~2015年大气负荷变化对地壳垂直、水平形变的影响，同时采用大气导纳方法计算大气变化对地面重力的影响。结果表明，大气负荷对新疆地区垂直形变的影响达到cm级，对地面重力的影响可达10 μGal；大气负荷影响具有明显的季节性。  相似文献   

低温超导瞬变电磁法在内蒙古四子王旗地质勘探中的应用     

包苏新  董丙元  裴易峰  荣亮亮  邱隆清  杜尚宇 《吉林大学学报(地球科学版)》2020,50(4):1211-1218

瞬变电磁法（transient electromagnetic method，TEM）是金属矿探查的有效手段。超导瞬变电磁法采用高灵敏度低温超导量子干涉器件（superconducting quantum interference device，SQUID）直接接收瞬变电磁二次场，具有本征噪声低（5~7 fT/√Hz）和带宽大（>200 kHz）等特点，勘探浅层分辨率高、探测深度大，优势明显。本文将SQUID系统与商用EM67系统进行了异常环对比实验，验证了以SQUID代替感应线圈作为接收装置的优势与实用性；将该方法应用于内蒙古四子王旗大井坡北部区域的电磁勘探工作，获取了高质量探测数据，反演结果显示浅层和中深层（> 2 000 m）为连续性低阻层；在已有地质资料和物探资料的基础上，结合反演结果可知，测线附近浅层500 m存在北东向断裂带，并推断深部2 000 m处分布着同向断裂带。  相似文献   

基于共轭梯度搜索的病态问题处理方法     

刘杰  张娟娟 《大地测量与地球动力学》2019,39(8):863-868

在最小二乘平差准则基础上，把病态平差问题转化为无约束的二次规划问题，并利用优化理论分析病态对平差解的影响。通过共轭梯度搜索算法在可行域中寻找最优步长因子，自动寻找最速下降方向，并给出迭代初值的设置方法。分析近似计算中病态问题与局部最优解的关系，讨论局部最优解的快速迭代方法，并通过实例验证算法的有效性，计算迭代的速度。由于整个过程没有对法方程系数矩阵进行求逆计算，该算法可用于处理大规模系数矩阵高病态的平差问题。  相似文献   

Regional extreme‐dry‐spell frequency analysis using the L‐moments method in the middle reaches of the Yellow River Basin,China          下载免费PDF全文

Dun‐Xian She  Jun Xia  Dan Zhang  Ai‐Zhong Ye  Aditya Sood 《水文研究》2014,28(17):4694-4707

In this research, the regional extreme‐dry‐spell frequency in the middle reaches of the Yellow River Basin (YRB) is studied by the L‐moments method. The research area has been divided into three subregions (regions 1, 2 and 3), which have been identified as homogenous regions. The results of a goodness‐of‐fit test indicate that a generalized normal distribution is the optimal regional model for regions 1 and 2 whereas a generalized Pareto distribution is the optimal regional model for region 3. The return period analysis figures out that the maximum length‐of‐dry‐spell (MxDS) values increase from south to north in the southern part and increase from northeast to southwest in the northern part of the middle reaches of the YRB under different return periods. The increments of quantiles of dry spell under different return levels indicate that drought risk in region 1 is higher than that in regions 2 and 3. The analysis of the occurrence day of MxDS shows that MxDS mostly occurred during winter of 1998 and spring of 1999 in most stations during the considered period. By comparing summer MxDS events, it can be found that mean MxDS values have slightly increased in regions 1 and 2 during the last five decades. The maximum mean MxDS values appeared in the 2000s for regions 1 and 2 and in the 1990s for region 3. The atmospheric circulation shows that the positive anomaly centre in the west of North China, negative anomaly centre in the east of North China and the strong western Pacific subtropical high led to the decrease of precipitation in North China during the summer of 1997. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Granular element method for three‐dimensional discrete element calculations     

Keng‐Wit Lim  José E. Andrade 《国际地质力学数值与分析法杂志》2014,38(2):167-188

This paper endows the recently‐proposed granular element method (GEM) with the ability to perform 3D discrete element calculations. By using non‐uniform rational B‐Splines to accurately represent complex grain geometries, we proposed an alternative approach to clustering‐based and polyhedra‐based discrete element methods whereby the need for complicated and ad hoc approaches to construct 3D grain geometries is entirely bypassed. We demonstrate the ability of GEM in capturing arbitrary‐shaped 3D grains with great ease, flexibility, and without excessive geometric information. Furthermore, the applicability of GEM is enhanced by its tight integration with existing non‐uniform rational B‐Splines modeling tools and ability to provide a seamless transition from binary images of real grain shapes (e.g., from 3D X‐ray CT) to modeling and discrete mechanics computations.Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

A new numerical approach to the hyperstatic reaction method for segmental tunnel linings     

Ngoc Anh Do  Daniel Dias  Pierpaolo Oreste  Irini Djeran‐Maigre 《国际地质力学数值与分析法杂志》2014,38(15):1617-1632

This paper proposes a numerical approach to the hyperstatic reaction method (HRM) for the analysis of segmental tunnel linings. The influence of segmental joints has been considered directly using a fixity ratio that is determined on the basis of the rotational stiffness. The parameters necessary for the calculation are presented. A specific implementation has been developed using a FEM framework. This code is able to consider the three‐dimensional (3D) effect of segment joints in successive rings on the tunnel lining behaviour. The present HRM allows one to take an arbitrary distribution of segment joints along the tunnel boundary into consideration. In addition, the rotational stiffness of segment joints has been simulated using nonlinear behaviour, as it is closer to the true behaviour of a joint than linear or bilinear behaviour. The numerical results of three hypotheses on ring interaction, which allow the 3D effect of a segmental tunnel lining to be taken into account, have been compared with data obtained from the shield‐driven tunnel of the Bologna–Florence high‐speed railway line project. The numerical results presented in the paper show that the proposed HRM can be used to effectively estimate the behaviour of a segmental tunnel lining. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Simulation of drilling‐induced compaction bands using discrete element method     

H. Rahmati  A. Nouri  D. Chan  H. Vaziri 《国际地质力学数值与分析法杂志》2014,38(1):37-50

Rock failure is observed around boreholes often with certain types of failure zones, which are called breakouts. Laboratory‐scale drilling tests in some high‐porosity quartz‐rich sandstone have shown breakouts in the form of narrow localized compacted zones in the minimum horizontal stress direction. They are called fracture‐like breakouts. Such compaction bands may affect hydrocarbon extraction by forming barriers that inhibit fluid flow and may also be a source of sand production. This paper presents the results of numerical simulations of borehole breakouts using 3D discrete element method to investigate the mechanism of the fracture‐like breakouts and to identify the role of far‐field stresses on the breakout dimensions. The numerical tool was first verified against analytical solutions. It was then utilized to investigate the failure mechanism and breakout geometry for drilled cubic rock samples of Castlegate sandstone subjected to different pre‐existing far‐field stresses. Results show that failure occurs in the zones of the highest concentration of tangential stress around the borehole. It is concluded that fracture‐like breakout develops as a result of a nondilatant failure mechanism consisting of localized grain debonding and repacking and grain crushing that lead to the formation of a compaction band in the minimum horizontal stress direction. In addition, it is found that the length of fracture‐like breakouts depends on both the mean stress and stress anisotropy. However, the width of the breakout is not significantly changed by the far‐field stresses. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Modeling deepwater seabed steady-state thermal fields around buried pipeline including trenching and backfill effects     

《Computers and Geotechnics》2014

Deepwater pipelines are designed to transport mixtures of oil and gas, and their associated impurities at wellhead temperatures that can be in excess of 149 °C (∼300 °F or 422 K) while the external temperature maybe in the range of 5 °C (∼41 °F or 278 K). Depending on the circumstances these pipelines may be buried for physical protection or for additional thermal insulation using robotic trenching equipment. This results in a complex cut and backfill geometry in the seafloor in addition to altering the thermal properties of the backfill. A two-dimensional boundary element model was developed specifically to address to investigate the local steady-state thermal field in the near field of the pipeline. The model allows one to account for the complex geometries in the near field associated with this burial technique, site-specific multi-layered soil conditions and the seawater adjacent to the seafloor. A parametric study was preformed to evaluate effects of the thermal power loss, burial depth, pipe diameter and soil thermal conductivity on the thermal field in the near field of a buried pipeline. The numerical examples illustrate the influence of the backfill thermal property on the temperature at the pipe wall, that the pipe diameter controls the required output thermal power needed to maintain the desired pipe wall temperature, and the importance of pipeline burial depth on seabed temperature distribution above the pipeline.  相似文献   

Critical Top Tension for Static Equilibrium Configuration of A Steel Catenary Riser     

Chainarong ATHISAKUL  Karun KLAYCHAM  Somchai CHUCHEEPSAKUL 《中国海洋工程》2014,(6):829-842

This paper aims to present the critical top tension for static equilibrium configurations of a steel catenary riser（SCR） by using the finite element method. The critical top tension is the minimum top tension that can maintain the equilibrium of the SCR. If the top tension is smaller than the critical value, the equilibrium of the SCR does not exist. If the top tension is larger than the critical value, there are two possible equilibrium configurations. These two configurations exhibit the nonlinear large displacement. The configuration with the smaller displacement is stable, while the one with larger displacement is unstable. The numerical results show that the increases in the riser＇s vertical distances, horizontal offsets, riser＇s weights, internal flow velocities, and current velocities increase the critical top tensions of the SCR. In addition, the parametric studies are also performed in order to investigate the limit states for the analysis and design of the SCR.  相似文献